SR100N Drive Circuit
| Performance indicators | Parameters | |
| The detector board is adaptable to various detectors* | Chip type * | Cooling linear array InGaAs, HamamatsuG11620/G11478 |
| Effective pixels | 512 | |
| Pixel size | 25μm*500μm | |
| Sensitive area | 12.8mm*0.5mm | |
| Electric parameter | Integral time | 1ms~12s |
| Data output interface* | USB2.0、UART | |
| ADC bit depth* | 16bit | |
| Communication protocol* | Custom protocol | |
| Power supply | DC4.9 to 5.1V（type @5V） | |
| Operating current | ＜3A | |
| Operating temperature | 10°C~40°C | |
| Storage temperature | -20°C~60°C | |
| Operating humidity | ＜90%RH（Non-condensation） | |
| Physical parameter | Main control board size | 60mm*50mm |
| Detector plate size | 42mm*23mm |
* Note：customizable
● Compatible with 512-pixel, cooled indium gallium arsenide chip, featuring high resolution and low stray light
● Compatible with USB or UART to output the measured spectral data for easy integration
| PIN | Name | Pin definition | |
| 1 | Power supply | DC 5V-3A | Inner diameter 2mm Outer diameter 6.2mm |
| 2 | Serial port | Standard 0RS232 signal interface | 1：TX 2：RX 3：GND |
| 3 | USB Communication port | Type-C port | |
| 4 | GPIO port | 5V TTL (Transistor-Transistor Logic) signal | 1：DO1（Digital output port1） 2：DO2（Digital output port1）2） 3：GND（Digital ground） 4：DI1 （Digital output port1）1） 5：DI2 （Digital output port1）2） |
Write your message here and send it to us
